The Dental Restoration Process and the Praise of Our Clients!
2024-04-07
For patients with tooth loss, porcelain teeth must be the most familiar dental restoration method, but because porcelain is composed of two layers of metal base and the outer porcelain layer, its color is very different from the real teeth, appearing very "abrupt", increasingly unable to meet the needs of the public. Later, zirconia all-porcelain teeth perfectly make up for this defect of porcelain teeth.
Many patients are not very familiar with this new dental restoration method, worried about whether there will be technical immaturity and other problems. In fact, the process and method of dental restoration is the same for zirconia all-porcelain teeth and porcelain teeth. honchon smile, the manufacturer of dental crowns, will give you a detailed introduction.
1. When fabrication, the doctor will recommend using the good teeth on both sides of the missing tooth as abutment teeth and removing about 1/3 of the tooth tissue. Usually, at the first visit, the dentist will prepare under local anesthesia and take a model and compare the color. The dentist and the patient jointly choose the appropriate tooth color and make a temporary crown according to the situation.
2. If the tooth has caries or missing tooth and the tooth nerve is not involved, the filling is needed first. If the filling is far from the dental nerve, the tooth can be prepared for porcelain crown restoration immediately after the filling is completed; if the filling is close to the dental nerve, it may need to be observed for a period of time according to the specific situation and increase the number of visits.
3. if the tooth has a large area of damage, tooth loss, has spread to the dental nerve or have periapical disease, you need to carry out complete pulp or periapical treatment first, and wait for the condition to improve before restoring porcelain crowns.
4. colorimetric, in order to ensure that the color of porcelain teeth and the original teeth or adjacent teeth similar, the doctor must use the colorimetric plate to compare the color of the original teeth and the original teeth, to determine the approximate color phase colorimetric plate on the range to avoid all-ceramic teeth, and natural teeth without color difference.
The production of zirconia generally uses the dry-press technique: zirconia ceramic powder mixed with molding aids is placed into a molding mold and dry-pressed into ceramic components and calcined at high temperatures in an oxidizing atmosphere to remove residual organic matter from the ceramic blanks. The ceramic blanks are put into the cylinder of the cold isostatic press for isostatic pressing. The degreased ceramic blanks are put into a high temperature furnace for sintering, and finally the sintered ceramic blanks are processed into zirconia blocks.
HONCHON SMILE's zirconia all-ceramic teeth are successfully sold overseas and have won the appreciation of our customers. Our 4D+ Multilayer zirconia blocks have 6 layers of natural color transitions that match the color levels of natural teeth from cervical to incisal; translucent gradations that perfectly reveal the natural teeth and natural soft color effects. A customer who used our 4D+ zirconia blocks to create a perfect crown has the following compliments about HONCHON SMILE.
Our goal is to make everyone smile aha and show off their smile to the fullest! If you have a purchase to make, please email us today or get in touch using whatsup and we'll be happy to give you great service.
